|
1. Left-intensive casting porosity, and other serious defects;
2. Use unqualified elbow plate, plate elbow pads, Crusher in strong shocks, since elbow board has not broken protection;
3. Fixed jaw displacement occurred in the rack, the rack-end collision at the bottom edge-boards;
4. Spring tension rod failure after yet timely replacement;
5. Provides nesting population is less than the limit;
6. Feed position is wrong, biased or one-hopper under the angle too steep so that the direct impact of materials moving jaw head.
Jaw Crusher mobile jaw fracture exclusion method:
2. Replacement of fixed jaw. Replacedproduction at the same time the
original elbow plate, plate elbow pads;
3. Replacement of fixed jaw. Eccentric shaft assembly at the same time correct, bearings, bushings and dynamic set tight jaw, the replacement of damaged parts;
4. Replacement of fixed jaw. Replacement rod spring;
5. Replacement of fixed jaw. Adjustment, as required, while nesting mouth;
6. Replacement of fixed jaw. Into the hopper at the same time by doing to ensure that the material uniform, smooth, and from intermediate points to the secondary side.
|